Load data for .30 Fl. N.E. Purdey + .308 | 100gr | Lapua OT Cutting Edge

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 100gr \| Lapua OT Cutting Edge
Manufacturer SKU:	4PL7224 \| G477
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.912" \| 23.2mm
Caliber:	.30 Fl. N.E. Purdey load data
Case Length (l3):	2.313" \| 58.8mm
Cartridge Length (C.O.L.):	2.935" \| 74.6mm
Seated Depth:	0.290" \| 7.4mm
Shank Seated Depth:	0.290" \| 7.4mm
Case Capacity:	58.0 Grains of Water \| 3.77 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B3139_C301
Last updated:	2025-01-01

Load data for 68 loads in caliber .30 Fl. N.E. Purdey with .308 | 100gr | Lapua OT Cutting Edge bullet and 34 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	41713	90%	**84	100%
ADI AR 2219	<<locked>>	89%	41524	89%	**20	95%
Accurate 2015	<<locked>>	94%	40640	88%	**68	98%
[Accurate 2460]*	<<locked>>	92%	40567	87%	**58	92%
Accurate 2495	<<locked>>	97%	36172	78%	**61	96%
[Accurate 2520]*	<<locked>>	97%	39262	85%	**91	93%
Alliant AR-Comp 👍	<<locked>>	97%	39842	86%	**36	99%
Alliant Reloder-10x 👍	<<locked>>	91%	41698	90%	**10	98%
Alliant Reloder-7	<<locked>>	84%	41220	89%	**35	99%
Baschieri & Pellagri 106	<<locked>>	88%	41524	89%	**92	96%
[Hodgdon Benchmark]*	<<locked>>	93%	41495	89%	**18	92%
Hodgdon H322	<<locked>>	94%	41524	89%	**20	95%
[Hodgdon H335]*	<<locked>>	89%	41191	89%	**97	94%
Hodgdon H4198	<<locked>>	85%	41278	89%	**95	95%
Hodgdon TrailBoss	<<locked>>	96%	29892	64%	**88	100%
[IMR 3031]*	<<locked>>	97%	34490	74%	**95	94%
IMR 4198 👍	<<locked>>	90%	41713	90%	**68	99%
[Lovex D073.4]*	<<locked>>	91%	41379	89%	**54	92%
[Lovex D073.5]*	<<locked>>	92%	41075	89%	**68	92%
Norma 200 👍	<<locked>>	87%	41539	90%	**91	99%
[Norma 202]*	<<locked>>	96%	38276	82%	**35	93%
ReloadSwiss RS 14	<<locked>>	96%	29370	63%	**24	100%
[ReloadSwiss RS 40]*	<<locked>>	92%	41524	89%	**81	93%
[Rottweil R 901]*	<<locked>>	96%	41626	90%	**74	94%
[SNPE Vectan SP 10]*	<<locked>>	88%	41655	90%	**10	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	40828	88%	**92	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	33634	72%	**31	92%
Somchem S335	<<locked>>	97%	40799	88%	**22	95%
Vihtavuori N120	<<locked>>	87%	41336	89%	**28	100%
Vihtavuori N130	<<locked>>	93%	41249	89%	**38	98%
Vihtavuori N133	<<locked>>	96%	37797	81%	**63	96%
[Vihtavuori N140]*	<<locked>>	96%	35998	78%	**53	93%
[Vihtavuori N540]*	<<locked>>	97%	35882	77%	**66	92%
[Winchester 748]*	<<locked>>	94%	41423	89%	**20	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	36477	79%	**76	100%
[ADI AR 2219]*	<<locked>>	81%	32460	70%	**74	92%
[Accurate 2015]*	<<locked>>	81%	27195	59%	**07	92%
[Accurate 2460]*	<<locked>>	89%	36593	79%	**59	90%
[Accurate 2495]*	<<locked>>	86%	24598	53%	**17	90%
[Accurate 2520]*	<<locked>>	92%	33750	73%	**49	90%
[Alliant AR-Comp]*	<<locked>>	81%	24265	52%	**51	92%
Alliant Reloder-10x	<<locked>>	81%	30182	65%	**15	95%
Alliant Reloder-7	<<locked>>	81%	37985	82%	**59	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	33460	72%	**95	93%
[Hodgdon Benchmark]*	<<locked>>	90%	37724	81%	**33	90%
[Hodgdon H322]*	<<locked>>	84%	29776	64%	**89	90%
[Hodgdon H335]*	<<locked>>	82%	32329	70%	**61	90%
[Hodgdon H4198]*	<<locked>>	81%	36535	79%	**77	93%
Hodgdon TrailBoss	<<locked>>	81%	23641	51%	**24	100%
[IMR 3031]*	<<locked>>	91%	28616	62%	**05	90%
IMR 4198	<<locked>>	81%	32590	70%	**41	97%
[Lovex D073.4]*	<<locked>>	87%	36419	78%	**46	90%
[Lovex D073.5]*	<<locked>>	89%	37072	80%	**69	90%
Norma 200	<<locked>>	81%	34403	74%	**20	97%
[Norma 202]*	<<locked>>	91%	31633	68%	**64	90%
ReloadSwiss RS 14	<<locked>>	81%	23177	50%	**60	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	35099	76%	**23	90%
[Rottweil R 901]*	<<locked>>	88%	32677	70%	**44	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	32547	70%	**74	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	31734	68%	**66	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	29646	64%	**10	90%
[Somchem S335]*	<<locked>>	86%	29472	63%	**30	90%
Vihtavuori N120	<<locked>>	81%	33982	73%	**64	100%
[Vihtavuori N130]*	<<locked>>	81%	29022	63%	**13	94%
[Vihtavuori N133]*	<<locked>>	83%	25541	55%	**05	90%
[Vihtavuori N140]*	<<locked>>	92%	31169	67%	**08	90%
[Vihtavuori N540]*	<<locked>>	94%	32401	70%	**74	90%
[Winchester 748]*	<<locked>>	92%	38290	83%	**41	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data